sysger.blogg.se - View kolor autopano video pro in oculus

This setting is on the left side of the lens. This is one click above the Full Automatic Mode (green box) setting.

Set the click-wheel setting to the P (Program AE) setting.

The camera Field of View (FOV) should be around 40°.

Align the horizon with the bottom of the camera screen (again with the viewfinder) at the next prompt.

Align the horizon with the top of the camera screen (using the viewfinder) at the prompt.

Scroll down and highlight Camera Setup, select OK.

Connect the cable between the camera and the Epic Pro.

Make sure the small silver pin is also locked.

Place the camera in the mount and rotate the locking pin to the locked position.

Rotate the locking pin to the unlocked position (parallel with the camera rail).

Hold the down button until the camera rail is level or angled up slightly.

Press the down button until you can highlight the Move Camera option, press OK.

Press and hold the power button on the Epic Pro until it powers on.

Use the bubble level to center and level the EPIC Pro.

Tighten the screw on the right side of the tripod to lock the Epic Pro in.

Slide the Epic Pro into the tripod’s mount and wait for the click to ensure that it’s all the way in.

Pack an extra SD card and make sure the battery in the camera and the backup battery are full. Make sure the battery in the GigaPan and the extra battery are charged

GigaPan EPIC Pro, connecting cable, and backpack.

This section will explain how to acquire images using Gigapan Epic Pro Robot that will later be stitched to create a panorama.

Operating and Loading IVE environments into WorldViz Introduction to Cube Mapping and Cube Wrapping Methods of image manipulation for IVE using Adobe Photoshop CSĪdding Other Decorations (People, Shrubs, and Benches) Stitching Images Using GigaPan Stitch.EfxĬommon stitching problem using Autopano GigaĮditing a Reference Panorama for Video Stitching Image Acquisition using GigaPan Epic Pro Robot